 |
 |
| SYS-6028UX-TR4 |
- SuperServer 6028UX-TR4 (Black)
|
| |
|
| CPU |
- Intel? Xeon? processor E5-2600 v4?/ v3 family (up to 160W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores? / Up to 55MB? Cache
|
| System Bus |
|
| Note |
? BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB? ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type |
- 2400?/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Connectivity |
|
| Graphics |
|
| |
|
| SATA |
|
| SAS |
- 12x SAS3 ports support via optional Add-on Card
|
| NVMe |
- 4x NVMe ports support via optional Ultra Riser card (AOC-2UR8N4-i2XT)
|
| LAN |
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| |
|
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
- Net Weight: 36 lbs (16.4 kg)
- Gross Weight: 72 lbs (32.7 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
|
| |
|
| PCI-Express |
- 3x PCI-E 3.0 x16 slot (FH, 10.5" L)
- 3x PCI-E 3.0 x8 slots
(1 in x16 FH 10.5" L, 1 LP, 1 Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
|
| Hot-swap |
- 12x Hot-swap 3.5" Drive Bays:
10x SATA3 ports by default
- Optional SAS3 support: 12x SAS3
- Optional NVMe support: 4x NVMe via AOC-2UR8N4-i2XT (2x 10GBase-T ports)
Note: optional storage card is required to support more than 10 drives.
|
| |
|
| 2U SAS/SATA backplane |
| |
|
| Fans |
- 4x 8cm heavy duty PWM fans
|
| |
| 1000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI? BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
